To quickly secure cable ties, you can follow these steps:
Get your tools: Make sure you have a cable tie that fits and scissors or a cutting tool if needed.
Thread the loop: Thread the cable tie through its own loop, making sure the sharp side of the tie is facing the cable and is against the cable surface.
Tighten the tie: Pull the end of the tie tight around the cable. Make sure not to overtighten it to avoid damaging the cable.
Secure the tie: Once the cable is wrapped tightly, you can secure it by pulling on the end of the tie. Some ties have a locking mechanism at the end, and you just need to pass the end through a small hole or notch and then tighten it.
Trim the excess: If the tie is too long, you can use scissors or a cutting tool to trim off the excess.
Please be careful when doing this and avoid scratching your skin with the sharp part of the tie. Also, be sure to choose the right tie to fit the size and shape of your cable.
Additionally, if you need to secure a large number of cables, you may want to consider other more efficient tools or methods, such as using cable ties or cable clamps.